Description |
Air & dirt separators are designed to eliminate circulating and trapped air and micro suspended dirt particles effectively and quickly from the piping system. It can reduce oxygen-based corrosion and pump cavitation to keep the piping system clean and efficient operation. Applied in closed loop hydronic piping systems, such as water, water/glycol mixes, etc. | ![]() |
![]() |
Features |
* Strainer cartridges made by copper wire mesh with honeycomb shape cells, capture both micro bubbles and tiny dirt particles as small as 5μm efficiently.
* Flanged cylindrical casing (optional) for easy opening and maintenance.
* Brass automatic air vent with big chamber at top to exhaust trapped air fast.
* Manual brass ball valve at bottom to drain dirt.
* Operation without downtime.
* Minimum pressure drop with no fluctuations.
* Decreased corrosion, pump cavitation and wear of system components.
* Robust carbon steel housing, spiral brass strainers, powder coating.
* Less maintenance, increased component life.
Specification |
Flow velocity inside chamber | ≤1m/s |
Operating pressure options | 10bar, 16bar, 25bar |
Fluid temperature range | 0~110℃ |
* Pressure drop chart
Installation |
Base on Henry’s Law, the dissolved gas in water is released from water as the temperature increases or the pressure decreases. For this reason, the device should be typically installed at the highest temperature and the lowest pressure points within a system. Ideally, the device should be located on the outlet of boilers, the inlet of chillers, and the suction side of pumps.
For dirt removal, installation position is not the most important, so when installation the air & dirt separator, air separation effect should be firstly considered.
The device must be installed horizontally. Pay attention to the direction indicated by the arrow which is the direction of water flow.
![]() | ![]() |
Detailed Images |
Working Video |
DOWNLOAD
Data sheet: Air & Dirt Separator
ORDERING INFO
Particular information: |
1. Pipe connection size.
2. Water flow rate.
3. Working pressure.
4. Casing type: welded, or flanged (recommended).
5. Connection flange standard.
General information for ordering: |
1. Quantity of each size.
2. Delivery location, and price term: EXW, FOB, CIF, DDU, DDP, etc.
3. Detailed information of the contact person and buyer's company, which is helpful to prioritize your inquiry with faster response and better price.
SHIPPING
Delivery Options:
Delivery Method | Incoterms Term | Applicable Countries |
LCL, FCL by sea | EXW, FOB, CFR, CIF | General for all countries. |
Air courier to door | DDU, DDP | General for all countries. |
Air cargo to airport | CIF | General for all countries. |
Door to door by road | DDP | Cambodia, Laos, Myanmar, Thailand, Vietnam. (keep expanding to more countries) |
Door to door by sea | DDU, DDP | Cambodia, Indonesia, Malaysia, New Zealand, Philippines, Singapore, Thailand, United Arab Emirates, United Kingdom, United States. (keep expanding to more countries) |
LCL=Less than Container Load. FCL =Full Container Load
DDU = Delivery Duty Unpaid DDP = Delivery Duty Paid
The above shipping information is general, and changing from time to time. Confirmation with us is necessary for each order.